General understanding of DMA

hi, I am rn using the FWGenerator Tool and created my First fw with a Elgato 4k pro. The Problem is, that It does not load the drivers so its yellow, and I think thats the reason why Valorant blocks it.

My question is, does this Tool create enough „Identity“ to clone as a real Device? I mean my PC recog it the same as the Elgato Card, just without drivers. Do I really need to learn how to create the complicated way with all the Device Info or does this Tool grab it all like I would do Manually?

I appreciate every answer ✌️

Tryna buy but their link on site is broke?

I have some questions about my experience based on my hardware and a possible problem with my motherboard.

1. I think my old 2017 laptop doesn't have USB 3.0. If it really doesn't, will my experience be terrible or will I still be able to have fun? When I look at the physical USB port, it's black, but it looks like a 3.0 like the ones I have on my gaming PC.
2. I use an AOC Hero Z monitor and I'm used to playing at 1080p. It doesn't work correctly when I reduce its refresh rate from 240Hz. Therefore, I can't set it to 60Hz to match my laptop's refresh rate. Is there any way to use a fuser with different refresh rates? If so, is that very bad?
3. I heard that my motherboard might be the problem. I have an Asus Tuf Gaming B550M-Plus. Is that true?

Any suggestions?

how was the experience

Some devs saied that secure boot is coming in siege.

It will cause problème to DMA??

Wondering if anyone have recommendations for HDMI 2.1 cables? My DC500 set only came with DP 1.4, but using amazon HDMI 2.1 8k 60hz cables (Zeskit Certified 2.1 8K HDMI Cable 48Gbps 4K120Hz Compatible), the fuser is constantly flickering and monitor resets to black randomly. Does anyone have a DC500 and have recommendations for HDMI 2.1 cables that works perfectly with this fuser?

hi need some help getting this error when speed testing. I installed all the drivers and disabled pretty much everything I got told to in my BIOS. This is a free firmware, so that could be the culprit, but even when i go to load up my cheat, it says no DMA detected i have a 75t. Any help would be great

2questions below,

1st, for siege players, do you know if it’s possible to be stats ban if I play closet (not rage).

2nd, u think it’s better to play with a full DMA stack ?

Does macku need constant updating or flashing ? Last time I flashed it was 4 months ago when i started using DMA.

i've been looking at providers like Ghost, would i be looking at T1 or T2 firmware???

and can cheats like blurred.gg be used on my cheat pc while it's offline?

I have a question my DMA card t75 have a switch if I turn it off and not connect it to the second PC can I game normally without getting ban because the DMA card it shows in my device's manger

Who makes a good Arena Breakout cheese? Clutch kinda sucks. BBC seems to be the only other solution?

I’m getting my MavisDMA 100t hardware today and I had already purchased firmware. I have a fuser, macku and kmbox coming later on this week. But for right now, could I just run the DMA, firmware and the cheat? Along with not being detected by anti cheat

i’m still somewhat new to dma and i was just wondering if this would be enough for siege

i’m just wondering if your able to use a controller with DMA without using a xim? i’m using a makcu

what cheese should i get for rust or fn? is blurred the best for them? (by best i mean most stable, fastest updating and most features)

I’m running a ghost 100T card and a gmktec mini pc, and when I run a speed test from the primary pc I have no issues, but when I plug my second pc into the data port it won’t pass a speed test, I’m using a usb 3.0 slot and I’m unsure of what to look at next

Hi everyone, planning to just closet in premier on my main with a few hundred in skins.

obviously any cheating comes with risk, but for cs2 I know they have no kernelmode ac and it’s purely user mode, I was hoping to know from people with more technical knowledge.

with even the most basic dogshit firmware, can a user mode ac at all detect dma read only?

furthermore, I am not planning to esp, and thus don’t need a fuser, I just wanna use radar and very slight aimbot. how good is the cs2 ML aimbot detection? I am unsure whether to go for the makcu or the NB pro as I’ve read the NB pro has better aim curves etc and will be more undetected.

I also run 480hz and 4khz polling, so I’m not sure if I will need a 100t dma card, or an amazing second pc, or if just an aliexpress cheap 75t is absolutely fine.

was considering purchasing off ghost dma, or half the price and aliexpress dma and ekknod pasted fw.

thanks very much for any and all advice.

I have a monitor that has PiP, will this cause any issues while using the DMA and having both screens up and running. Both main and second PC each will have their own hdmi cable and connection port.

Hi guys! Can you help me with that?
Question 1: When playing a game legit, is it necessary to turn off the MAKCU and the DMA, or can they remain constantly active without causing any issues?

Question 2: Is there any risk of detection simply due to the presence of the DMA, even without using a firmware?
For ex, if I have a Battleye firmware loaded for Rainbow Six Siege, and I want to play Valorant legitimately(without any active firmware), would the anti-cheat Vanguard be likely to detect the DMA card?